Air conditioning systems are very beneficial in hot weather where you feel sweaty all the time. However, like any other appliance that you’re frequently using, it helps if you conduct regular maintenance on your unit to lengthen its lifespan and help it function more efficiently.
When you forget to give them the necessary maintenance, you may see higher electricity bills at the end of the month and a steady decline in their performance. Fortunately, some experts can get the air conditioning installation right the first time and do service maintenance when your AC gets dirty. If you need repairs, the right company will also help you out in these jobs in the fastest possible manner.
Which Parts Need the Maintenance?
Filters
One of the routine checks you should do is ensure that the filters are clean and unclogged. Replace them often if possible, so they don’t block the airflow inside your home. The dirty ones will usually reduce the efficacy of the AC by about 5% to 15%.
With the normal airflow obstructed by dirt, debris, algae, or molds, the evaporator coil may become too hot, and its absorption capacity may be affected. Replacing the dirty and clogged filters will improve your unit’s energy efficiency, and you can get help from the experts if you’re unsure how to do this.
For central air conditioning units, you may want to search for the filters near the ducts along with the return unit. The typical locations are on the ceilings, walls, or inside the AC itself. Some are mounted, and they generally face the room, so you can easily remove them. Read more about where to find the filters on this site here.
Other types are reusable, while there are still some that require replacement. During the season where the use of the unit is heavier, it’s essential to replace the filters for more efficiency. This is primarily a must if you have furry pets around or your home is near a dusty location.
Coils
The evaporator and condenser coils may collect dirt after months or years of service. Filters that are new or cleaned will prevent the evaporator coils from getting dirty. However, even if there’s a newly installed filter, there will still be dirt collected on the evaporator coils, and they will insulate this part to decrease airflow. The coils’ ability to absorb heat will significantly be reduced, and this is an issue that may require you to get another AC.
Outdoor condenser coils can be dirty, especially if there are bushes and foliage near the units. During installation, it’s best if you could make it clear to the workers that you wanted your split-type AC to be as far away from the plants as possible. Also, the best HVAC technicians will schedule regular maintenance to clean the things that are dirty and full of molds. Know more about cleaning the coils yourself here: https://www.inquirer.com/real-estate/home/air-conditioner-cleaning-home-maintenance-20200815.html.
Minimize the debris and dirt around your condenser unit. Pay attention to the vents where leaves tend to gather in the fall and remove the debris when you see them. Trim the foliage by at least 0.6 m for more airflow around your condenser units.
About Hiring a Professional
Sometimes, specific jobs that need to be done in your AC unit are not something that you can tackle alone. You may want to contact a technician that’s well trained in repairs and installations so they can fix the issues on your units. Some of the services that they can do for you are the following:
- Checking the right amount of the refrigerant and refilling them if possible
- Testing the refrigerants for possible leaks through detectors
- Capture the refrigerant that should be removed from the entire system instead of releasing everything into the environment
- Seal and check for leakage in the central system
- Measure airflow that’s present in an evaporator coil
- Verify the proper sequence of electric control and ensure that the cooling and heating functions don’t work at the same time.
- Tighten and clean connections, verify the electric terminals, and apply a non-conductive coat whenever it’s needed
- Check belts and oil motors for possible wear and current tightness
- Ensure that the numbers are accurate on the thermostat
The technicians will also advise clients whether it’s time to do a repair or replacement, whichever applies best. With the best HVAC company, you’ll never have to worry about getting hot and sweaty on a summer day. Learn more about an HVAC company in this url.
They will go to your home after you call them, and they will do the repairs in no time. They will also schedule maintenance whenever there’s a need to ensure that your appliance will have a longer lifespan.