Peel and stick wallpaper means no hassle. Whether you are shifting into a new home or renovating your house, incorporating peel and stick wallpaper can change the look of your space. If you compare these wallpapers to the wallpapers that were available in the market a few years ago, you would find a huge difference. Peel and stick wallpapers of colors and patterns that would look beautiful around your house. They are lined with an adhesive that makes the wallpaper easy to install.
Installing a peel and stick wallpaper is a great way to enhance your space and make it look modern. People worldwide are getting in touch with the latest interior design trends and one of them is peel and stick wallpaper. Unlike the traditional wallpaper there is no Messy adhesive that you have to use to install these wallpapers.

Step by step guide to install a wallpaper:
The first thing that you have to do if you want to install a peel and stick wallpaper is gather the materials. If you are planning to install the stick and peel wallpaper yourself you need the adequate material otherwise your wallpaper won’t look good. Here are some materials that you need to have at hand to install a wallpaper.
- Peel and stick wallpaper rolls
- Measuring tape
- Utility knife or scissors
- Level or straight edge
- Squeegee or credit card
- Step ladder (if needed)
Prepare the surface: The first step is to start cleaning the wall or the surface on which you are going to be applying the peel and stick wallpaper. Remove any dust, dirt or grease with a mild water and soap solution. You have to allow the solution to dry completely on the walls. If there are many imperfections on the wall, correct them using a spackle or putty to fill them in and use sandpaper to smooth the surface out.
Measure and cut: The next step is to measure the wallpaper that is going to be applied on the walls. For this, you have to measure the height and width of the wall and add a few inches to both dimensions so that any trimming and adjustment can be made after the wallpaper has been applied completely.
Start at the corner: You have to start from the top corner of the wallpaper strip. Align the exposed and sticky edge to the top corner of the wall and press it into proportion.
Apply the wallpaper: Slowly move the wallpaper downward a few inches at a time and use your credit card to smooth any bubbles that form on the surface. Work your way through the whole wall step by step. If you are working on the whole room then start with one wall and then move to the next.
Trim excess wallpaper: Once the entire wallpaper is applied use a scissor or a cutter to trim the extra edges of the wallpaper.
Repeat the process: Continue applying the floral peel and stick wallpaper strip by strip until you have covered the whole wall. Make sure that the pattern is aligned according to the wall.

When the time comes to remove the peel and stick wallpaper make sure you locate a starting point and then start peeling from there. Peel off the wallpaper carefully to avoid damaging the wall.
Peel and stick wallpapers are easily available in the market and can be applied without any hassle. You need to have the proper tools at hand before you start the project of applying the wallpaper.